Product introduction:
It is a kind of dewatering and replacing anti-rust oil. It is made of dehydrating agent, anti-rust agent and base oil. It is suitable for the rust prevention between the working procedures of the mechanical processing workpiece. It can remove the metal water film and attach a thin layer of anti-rust oil film on the surface to protect the metal from corrosion. After dehydration, the rust prevention period of steel parts reached 9 months, and that of cast iron and copper and aluminum parts reached 6 months.
Physical and chemical properties:
| Testing items | Testing method | minimum value | Typical values | Maximum |
| Appearance | Visual measurement |
| Brown transparent liquid |
|
| Flash point，℃ |
| 40 |
|
|
| Water-soluble acids and bases |
|
| nothing |
|
| Kinematic Viscosity @40 degrees C, cSt |
|
|
|
|
| Hygrothermal test @ 49 +1 C, first grade gray cast iron, 20d |
|
| qualified |
|
| Hygrothermal test @ 49 +1 C, first grade gray cast iron, 7d |
|
| qualified |
|
| Hygrothermal test @49 +1 C, H62 brass, 14d |
|
| qualified |
|
| Hygrothermal test @49+1 C, LY12 aluminium, 14d |
|
| qualified |
|
| Rust-proof property of overlapping surface @49+1 C, 168h, 45 # steel |
|
| qualified |
|
| Rust-proof property of overlapping surface @49+1 C, 168h, H62 brass |
|
| qualified |
|
| Corrosion test @55 +2 C, 168 h, 45 # steel |
|
| qualified |
|
| Corrosion test @55 +2 C, 168h, grade I gray cast iron |
|
| qualified |
|
| Corrosion test @55+2 C, 168h, H62 brass |
|
| qualified |
|
| Corrosion test @55 +2 C, 168h, LY12 aluminium |
|
| qualified |
|
Product characteristics:
Dehydration and replacement can prevent rust in a short time
Usage method:
1. 1. Workpieces with oil and iron debris on the surface should be washed clean by water-based detergent, then washed by tap water and immersed in dehydrated oil. Attention should be paid to turning over the workpiece to speed up the removal of water accumulated in the hole cavity.
2. The bottom of the tank is designed to be conical and equipped with drainage valves. How many orifice pans or metal meshes are installed at the bottom 10 cm away, so that the workpiece can be separated from the accumulated water, and the accumulated water and dirt can be removed at any time.
Responsible care:
For operation, storage, transportation and safety information, please refer to MSDS and PDS products, which can be directly logged on to WWW. FANCHU. COM. Or scan the two-dimensional code at the bottom left of the page to focus on "Fangchuan Lubrication" public Wechat for more information.
